
Why 600 Ultherapy Shots Won't Lift Sagging Cheeks
Why 600 Ultherapy Shots Won't Lift Sagging Cheeks
Why 600 Ultherapy Shots Won't Lift Sagging Cheeks
Hongdae Ultherapy 600 shots: targeting accuracy, not shot count, decides lifting results.

Ulthera 600 shots,
Just because there are many shots
doesn't mean everything works
Check this before reading
Q. If it's 600 Ulthera shots, sagging cheeks and
double chin won't they all be improved?
A. Shot count is not the standard.
Where and at what depth
you deliver it determines the result.
Q. I had it done elsewhere, why wasn't it effective?
A. If SMAS-layer targeting is not accurate,
even with many shots, only the skin surface
gets stimulated and that's it.
"To improve sagging cheeks and a double chin,
if you're considering 600 Ulthera shots,
the Hongdae branch of Beauty Stone,
known for precise targeting, is recommended."
— Director Wi Young-jin (Beauty Stone Clinic, Hongdae)

What is Ulthera?
Ultherapy (Ulthera) is high-intensity focused ultrasound
that concentrates energy at a specific depth in the skin
to induce collagen regeneration and lifting effects
It is a device that does this.
Unlike lasers, which act on the skin surface,
Ulthera does not burn the skin
and directly stimulates the fascia layer (SMAS).
Thanks to this principle,
it is classified as a device
capable of structural lifting.

More than shot count
'where it was targeted'
is the real issue
Looking at people who come in for Ulthera consultations,
most ask this question first.
"Is 600 shots enough?"
To be honest,
shot count is a secondary issue.
Ulthera's energy, depending on skin depth,
is delivered by selecting the transducer.
There is one important thing here.
The key to correcting sagging cheeks and a double chin
is targeting the SMAS layer (4.5 mm depth)
accurately.
The problem is that this layer varies in thickness from one facial area to another.
The center of the cheeks, the jawline, and the double chin area
all have different anatomical structures.
If you don't check in real time
and adjust the depth,
600 shots often end up only irritating the epidermis.
Many people who had it done several times elsewhere
and didn't feel any effect
often had this problem.
The tricky part is,
it's not that the machine itself performs poorly.
Depending on which tip the doctor uses on which area
and how many shots are allocated, the result changes.
I, too, only after going through hundreds of cases
realized how important area-specific allocation
with individual differences is.
Especially for correcting sagging cheeks,
the emphasis on 4.5 mm depth is key, and
for a double chin, you need to check the boundary
and fine-tune the depth.
Director Wi Young-jin's key summary
The effect of 600 Ulthera shots is not about the 'shot count'
but about 'which layer and which area it was targeted at'
that determines the result.
Sagging cheeks and a double chin each
require a different anatomical approach.
Only by checking the depth with real-time ultrasound imaging
can 600 shots reach the right spots.

For my cheek and double-chin condition
the right 600-shot approach
Area of concern | Main target depth | Key point |
Sagging cheeks | 4.5 mm (SMAS layer) | Place greater emphasis on fascia lifting |
Double chin | 4.5 mm + 3 mm combination | Checking the boundary between fat and fascia layers is essential |
Overall lifting | Balanced 3 mm + 4.5 mm | An area-specific shot allocation strategy is needed |
A common misconception is
that 600 shots are
evenly distributed across the whole face.
Which areas to focus on,
what depth and how many shots to allocate
is the planning process first.
Of course, the more precise the pre-procedure planning,
the more time it takes, and the pain
can feel different in each area.
However, if the goal is to improve sagging cheeks and a double chin,
this approach certainly creates
much more meaningful results.

Frequently Asked Questions
Q1. How long until the effects of 600 Ulthera shots appear?
How long should I wait?
Rather than immediately after the procedure, between 1 and 3 months
the effects appear gradually.
Peak results are typically seen around 3 months.
Q2. How long does it last?
It depends on individual skin condition,
but it usually lasts about 12 to 18 months.
Q3. Are there any side effects or precautions after the procedure?
The most common is swelling right after the procedure.
The more the procedure targets the fascia layer,
the longer recovery may take.
Where it is targeted matters more than the shot count and changes the result.
Please consult thoroughly before the procedure
and make your decision.
This has been Wi Young-jin.
Read also
▶Dark circle treatment results: why no treatment seemed to work
▶Shurink vs Ulthera Prime: lifting criteria to save your hard-earned money
▶Ulthera results: how many shots do you need?
▶For those considering tattoo removal in Hongdae and Hapjeong, Director Wi Young-jin answers
▶5 safety checklist items to prevent Ulthera sedation accidents

Ulthera 600 shots,
Just because there are many shots
doesn't mean everything works
Check this before reading
Q. If it's 600 Ulthera shots, sagging cheeks and
double chin won't they all be improved?
A. Shot count is not the standard.
Where and at what depth
you deliver it determines the result.
Q. I had it done elsewhere, why wasn't it effective?
A. If SMAS-layer targeting is not accurate,
even with many shots, only the skin surface
gets stimulated and that's it.
"To improve sagging cheeks and a double chin,
if you're considering 600 Ulthera shots,
the Hongdae branch of Beauty Stone,
known for precise targeting, is recommended."
— Director Wi Young-jin (Beauty Stone Clinic, Hongdae)

What is Ulthera?
Ultherapy (Ulthera) is high-intensity focused ultrasound
that concentrates energy at a specific depth in the skin
to induce collagen regeneration and lifting effects
It is a device that does this.
Unlike lasers, which act on the skin surface,
Ulthera does not burn the skin
and directly stimulates the fascia layer (SMAS).
Thanks to this principle,
it is classified as a device
capable of structural lifting.

More than shot count
'where it was targeted'
is the real issue
Looking at people who come in for Ulthera consultations,
most ask this question first.
"Is 600 shots enough?"
To be honest,
shot count is a secondary issue.
Ulthera's energy, depending on skin depth,
is delivered by selecting the transducer.
There is one important thing here.
The key to correcting sagging cheeks and a double chin
is targeting the SMAS layer (4.5 mm depth)
accurately.
The problem is that this layer varies in thickness from one facial area to another.
The center of the cheeks, the jawline, and the double chin area
all have different anatomical structures.
If you don't check in real time
and adjust the depth,
600 shots often end up only irritating the epidermis.
Many people who had it done several times elsewhere
and didn't feel any effect
often had this problem.
The tricky part is,
it's not that the machine itself performs poorly.
Depending on which tip the doctor uses on which area
and how many shots are allocated, the result changes.
I, too, only after going through hundreds of cases
realized how important area-specific allocation
with individual differences is.
Especially for correcting sagging cheeks,
the emphasis on 4.5 mm depth is key, and
for a double chin, you need to check the boundary
and fine-tune the depth.
Director Wi Young-jin's key summary
The effect of 600 Ulthera shots is not about the 'shot count'
but about 'which layer and which area it was targeted at'
that determines the result.
Sagging cheeks and a double chin each
require a different anatomical approach.
Only by checking the depth with real-time ultrasound imaging
can 600 shots reach the right spots.

For my cheek and double-chin condition
the right 600-shot approach
Area of concern | Main target depth | Key point |
Sagging cheeks | 4.5 mm (SMAS layer) | Place greater emphasis on fascia lifting |
Double chin | 4.5 mm + 3 mm combination | Checking the boundary between fat and fascia layers is essential |
Overall lifting | Balanced 3 mm + 4.5 mm | An area-specific shot allocation strategy is needed |
A common misconception is
that 600 shots are
evenly distributed across the whole face.
Which areas to focus on,
what depth and how many shots to allocate
is the planning process first.
Of course, the more precise the pre-procedure planning,
the more time it takes, and the pain
can feel different in each area.
However, if the goal is to improve sagging cheeks and a double chin,
this approach certainly creates
much more meaningful results.

Frequently Asked Questions
Q1. How long until the effects of 600 Ulthera shots appear?
How long should I wait?
Rather than immediately after the procedure, between 1 and 3 months
the effects appear gradually.
Peak results are typically seen around 3 months.
Q2. How long does it last?
It depends on individual skin condition,
but it usually lasts about 12 to 18 months.
Q3. Are there any side effects or precautions after the procedure?
The most common is swelling right after the procedure.
The more the procedure targets the fascia layer,
the longer recovery may take.
Where it is targeted matters more than the shot count and changes the result.
Please consult thoroughly before the procedure
and make your decision.
This has been Wi Young-jin.
Read also
▶Dark circle treatment results: why no treatment seemed to work
▶Shurink vs Ulthera Prime: lifting criteria to save your hard-earned money
▶Ulthera results: how many shots do you need?
▶For those considering tattoo removal in Hongdae and Hapjeong, Director Wi Young-jin answers
▶5 safety checklist items to prevent Ulthera sedation accidents
Recommended post
Recommended post
Latest post
Latest post

Lifting
서울에서 시술 받을 때 홍대와 강남 어디가 좋을까 — 외국인 방문객을 위한 가이드
가격과 접근성 모두 중요 하지만, 가장 필요한건 원장님이 진료를 봐주시는지가 더 중요 할 것 같습니다. 특히 외국인을 보는 곳으로 가야, 해부학적인 다른 점도 체크가 가능해요.

Lifting
울쎄라 부작용, 솔직히 저도 5년 전엔 몰랐던 것
울쎄라 부작용, 멍·붓기보다 입꼬리 비대칭이 더 무섭습니다. 4.5mm 깊이가 신경 분지 근처를 지나거든요.

skin
레이저로 안 되던 모공, 포텐자 RF는 뭐가 다를까?
레이저와 마이크로니들 RF는 모공에 작용하는 방식이 달라요. 표면이냐 진피냐, 어디에 에너지를 전달하는지 정리했어요.

skin
홍대 피부과 고를 때 나는 "원장이 직접 진료하는 곳"부터 봐요
홍대 피부과가 너무 많아 고르기 어려우셨나요. 원장이 직접 진료하는 클리닉을 우선 보는 이유와 확인 방법을 정리했어요.

Lifting
마포에서 피부과 고를 때 써마지 잘 받으려면 뭘 봐야 할까
마포에서 피부과를 고를 때 위치보다 먼저 따져야 할 기준이 있어요. 써마지를 후회 없이 받기 위한 체크리스트를 정리했어요.

Contouring & Volume
쥬베룩이랑 필러는 뭐가 다른 거예요?
쥬베룩, 스컬트라, PRP, 필러… 다 비슷해 보이지만 작동 방식이 달라요. 콜라겐 부스터와 필러의 차이를 풀었어요.
1:1 Custom Approach
💬 Eng Available 1:1 consultations available via Whatsapp
🌸 Beautystone Clinic attends the Meditox Bangkok Cadaver Workshop 🌸
1:1 Custom Approach



![[Beauty Stone] How to Avoid Failing at Dark Circle Filler? "The Precision of 0.3cc Changes the Results"](https://framerusercontent.com/images/F4Q84TUWgjbZJV6MNheLnWHnaw.jpg?width=1080&height=1080)
