Revealed by a practicing doctor

Ulthera by shot count

Fair Price Guide

"Ulthera price,

did you pay based only on the number of shots?

Sorry, but you wasted your money."

In the consultation room,

whenever I hear,

"I got 600 shots but saw no effect,"

there is something I ask first.

"Out of those, for the 4.5mm cartridge,

how many shots was it?"

Most people can’t answer.

The secret that cheaply advertised "factory-style Ulthera"

never tells you

is right here.

Today, about Ulthera cost,

I’ll give you a clear, complete summary.

Q. For Ulthera, 300 shots vs 600 shots,

is the cost exactly double?

Roughly yes, but more than shot count,

area composition is far more important.

Q. Places that advertise cheaply,

are they different somehow?

Yes, they are different.

The device generation, cartridge condition,

and practitioner qualifications may differ.

Q. Can you see results

after just one session?

Yes.

However, only on the premise that from the start

you receive the proper shot count

and energy settings.

Ulthera cost,

why does it vary by clinic?

Ulthera costs

vary quite a lot by clinic.

Even for the same "full face 600 shots,"

it can actually be a completely different procedure.

There are three main reasons

for the price difference.

1. Difference in device generation

Ulthera is an authentic device by Merz.

But similar HIFU devices

are often marketed as if they were "Ulthera treatment."

The operating principles may be similar,

but in clinical data and precision,

there is a clear difference.

2. Cartridge condition

Cartridges are consumables.

If used beyond the designated usage count,

energy delivery weakens.

To lower costs at factory-style clinics,

they may overuse cartridges.

You absolutely cannot tell with the naked eye.

3. Practitioner qualifications

Whether a doctor performs it directly,

or delegated treatment is done,

also affects price and outcomes.

Ulthera delivers energy

to deep layers near the periosteum.

If treatment is done without accurately knowing nerve locations,

side effects can occur.

In short, you should never compare only the price.

You need to check what is included.

By shot count and area

Actual cost structure

Ulthera pricing is usually

in a "shot count × unit price" structure.

The table below shows the approximate

market range.

Please use it for reference only.

What matters

is not the shot-count number.

Ulthera delivers energy at three depths:

the skin layer, dermis, and fascial layer (SMAS).

The key to improving sagging is

targeting the fascial layer with the

4.5mm cartridge.

This is the most expensive and depletes the fastest.

In low-cost packages,

the proportion of shallow-layer cartridges is higher,

and 4.5mm shots are often fewer.

This is why, during consultation,

you must ask about the cartridge composition.

Director Wi Youngjin’s practical note:

In my experience, for the full face,

the 4.5mm cartridge needs to be at least 200 shots

to improve sagging.

Even if it’s advertised as "600 shots,"

if only 50 shots are 4.5mm,

that’s closer to a skin-texture improvement procedure.

With a proper setup for full face + neck,

it is true that the cost often exceeds KRW 3,000,000.

I also explain this part in advance.

But getting one proper treatment

is better than several mediocre ones.

In Hapjeong · Hongdae,

what you must check

This area has many skin-treatment clinics,

so price competition is really fierce.

To match lower prices,

there are definitely clinics that cut

important components.

Before consultation, check just three things.

1. Is it authentic Merz

Ulthera equipment?

Check whether there is a certificate in the clinic.

If not, you can ask.

2. Do they disclose the

cartridge composition?

When you ask, "How many 4.5mm shots are included?"

it’s better if they answer clearly.

3. Who performs the procedure directly?

Whether the doctor directly designs and performs it.

Ulthera is safest and most effective

when performed directly by a doctor.

Honestly, places that follow all three

may not be that common if you look around.

Is one session enough?

For Ulthera, there is no fixed formula

that says "you must get it this many times."

Results are usually best

2–3 months later rather than immediately after.

Because collagen regeneration

takes time.

Even if it doesn’t seem different right away,

don’t worry—it’s a natural process.

If done with proper composition,

even one session is clearly noticeable.

Typically, results are maintained for about a year,

and patients tend to return after that.

Of course, aging doesn’t stop permanently,

but skin elasticity in those who manage regularly

is definitely different.

Frequently Asked Questions

Q1. Is the procedure very painful?

Honestly, yes—it really hurts.

Especially when delivering energy to deep layers.

But that is also

evidence that the energy is being delivered well.

With painkillers or nerve-block anesthesia,

it can be managed sufficiently during treatment.

Q2. Can I visit

without an appointment?

Because consultation and design are needed,

we recommend making a reservation in advance.

Before your visit, you may also

ask first via KakaoTalk.

We are open on Sundays as well.

Q3. Can I

resume daily life right away?

Yes, you can.

Slight swelling usually subsides within 1–2 days.

Please avoid alcohol and intense exercise for a few days.

If you have questions, contact us via KakaoTalk.

I will reply personally.

This was Wi Youngjin of Hapjeong Beautystone Clinic.

✦ Read together

• 5 safety checklist items to prevent Ulthera sedation anesthesia accidents

  
  
  

• Nasolabial fold botox side effects: your mouth can become crooked (not AI-written)

  
  
  

• Why Ulthera approaches should differ for men and women

  
  
  

• Sculptra side-effect nodules: how to prevent them

  
  
  

• Botox effect timeline — wrinkles in 1 week, square jaw in 1 month?